PROTEK 3110

Digital Osiloskop Protek 3110 Protek 3110 2 Channel, 100MHz Digital Storage Oscilloscope Sampling Rate: 1GSa/ s & Rise time: 3.5ns 100MHz Bandwidth with 2 Channels 1GSa Real-time Sampling Rate 25GSa/ s Equivalent-Time Sampling Rate Large 7-inch Color Display Record Length up to FFT Multi-Languages Support USB Host and Device Connections Spesifikasi - Digital Osiloskop Protek 3110 Specifications Vertical Specifications Channels 2 Bandwidth 100MHz Rise Time 3.5ns ( Approx.) Input Impedance Resistance: 1 M + / - 2% Capacitance: ( 20+ / -5) pF Polarity Normal & Invert Maximum Input 400V ( DC + AC Peak) Waveform Signal Process CH1 + / - CH2, CH1 x CH2, CH1/ CH2, FFT Bandwidth Limit 20MHz + / -% Typical Horizontal Specifications Sampling Rate 1GSa/ s Equivalent Max. Sampling Rate is 25GSa/ S for all Times Range ( 1 - 2 - 5 Increments) 50s/ div ~ 5ns/ div Mode Main Sweep, Main Sweep + Delay Expansion Sweep, X-Y Trigger Specifications Source CH1, CH2, EXT., EXT/ 5, AC Line Mode Auto, Normal, Single Trigger Sensitivity DC: CH1/ 2 ( typical) 1 Div from DC to 10MHz; 1.5div from 10MHz to full EXT ( Typical) : 200mV from DC to 40MHz EXT/ 5 ( Typical) : 1V from FC to 40MHz AC: Attenuates signal below 10Hz HF Reject: Attenuates signals below 15kHz LF Reject: Attenuates signals below 150 kHz Noise Reject: Reduces trigger sensitivity Trigger Level Range CH1, CH2: + / - Division from center of screen EXT: + / - 1.2V EXT/ 5: + / - 6V Trigger Level Accuracy ( Accuracy is for signals having rise and fall time at max 20ns) CH1, CH2: + / -( 0.3div x V/ div) ( within + / -4 Division from center of screen) EXT: + / - ( 6% of Setting + 40mV) EXT/ 5: + / - ( 6% of setting + 200mV) Edge Trigger Rising, Falling, Rising & Falling Pulse Width Trigger Trigger ( when > , , 2 Delay 1- > 2 Cursor Measurement Voltage Difference between cursors V Time Difference between Cursors T Frequency difference between Cursors 1 T Display TFT LCD Type 7.0 Inch Diagonal Crystal Display Display Resolution 800 x 480 Dots General Specifications USB USB Host / USB Device Power Source AC 100V ~ 240V + / - 10% , 45Hz ~ 440Hz, Auto Selection Physical Dimensions 12.3 x 4.25 x 5.6 " inches ( 313 x 108 x 142mm) Weight 4.6lbs ( 2.08Kg)